Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Spring Repair for Chesapeake Homeowners
A broken spring is the one garage door failure that stops everything. The door won’t lift, the opener hums and strains, and your car sits trapped inside. Spring work is also the most dangerous repair on the whole door: a torsion spring under load carries enough force to cause serious injury, which is why it belongs with a trained technician, not a homeowner with a winding bar and a video. Our technicians have up to 9 years of experience and have handled torsion springs, extension springs, and the safety cables that back them up on doors across Chesapeake. We answer 24/7 and run fast dispatch from 7am to 7pm, Sunday through Friday, so a spring that lets go on a Sunday morning gets a real person on the phone, not a recording. For same-day garage door spring repair in Chesapeake, call (877) 419-7485.
Key Takeaways
- Spring repair in Chesapeake typically runs $180 – $340 for one spring; a matched pair costs about twice that because both usually get replaced together.
- We repair and replace torsion and extension springs, adjust tension, and fit safety cables.
- Our technicians have up to 9 years of experience and work on Amarr, Wayne Dalton, Craftsman, and Raynor systems.
- We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
- Free estimates, and the price is quoted and agreed before any work starts.
What Our Garage Door Spring Repair Service Includes
Springs are one system with a few very different jobs inside it, and the right fix depends on which one is in front of us. Here’s what each part of the work actually covers.
Torsion Spring Replacement
A torsion spring is the coiled spring mounted on the shaft above the door, and it does most of the lifting work through a winding and cable system. You need replacement when the coil snaps (often with a loud bang), the door becomes nearly impossible to lift by hand, or the opener strains and trips. We measure the existing spring’s wire size, inside diameter, and length before fitting a matching replacement, then wind it to the correct tension and test the door’s balance by hand before we reconnect the opener.
Extension Spring Replacement
Extension springs run along the horizontal tracks on each side and stretch as the door closes. They’re the older style and the more dangerous one to leave broken, because a failed spring can whip toward the door or the opener rail. We replace them in matched pairs, check the pulleys and cables they ride on, and confirm the door closes evenly across the whole width.
Broken Spring Repair
Most broken spring calls are one clean snap, but we also see cracked coils, stretched springs that have lost their lift, and springs that failed because the wrong size was fitted last time. We identify which of those it is before quoting, because a stretched spring and a broken one don’t need the same fix. You get the diagnosis, the reason, and a written price before anything is touched.
Spring Adjustment
Sometimes the spring isn’t broken, just out of balance: the door drifts down on its own, slams at the bottom, or needs a shoulder to lift. That points to tension that has changed with wear. We adjust torsion tension or rebalance an extension setup, then check that the door holds position at the halfway point. Springs are under extreme tension during adjustment, so this is one job we never recommend a homeowner attempt.
Safety Cable Installation
Safety cables run through the center of an extension spring so that if it breaks, the spring is contained instead of flying loose. They’re a small part with a big job, and many older Chesapeake doors were built without them. We fit cables on extension spring systems and inspect the ones already there for fraying or a loose anchor.
Spring Inspection
A spring inspection means checking the coils for cracks and gaps, testing the door’s balance and lift, and looking at the cables, drums, and rollers that work alongside the springs. It’s worth doing when the door feels heavier than it used to, before a snap leaves you stranded. We tell you plainly what needs attention now, what can wait, and what it will cost.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Spring Repair
Spring and hardware sizing vary by manufacturer, so knowing the brand on your door saves time. We work on Amarr doors regularly and know how their spring systems and track hardware are set up, which helps us match the right spring the first time. Wayne Dalton is another brand we see often in Chesapeake, and we’re familiar with the balance and tension setups on their doors, including the models that use a torque-master style tube instead of a conventional torsion spring.
Craftsman doors and openers are everywhere in this area, and we know where their spring and opener components wear out. Raynor makes a heavy, well-built door, and we understand how their spring systems are tensioned and adjusted. Whether you have Amarr, Wayne Dalton, Craftsman, or Raynor equipment, our technicians can help. We also work on LiftMaster, Chamberlain, Genie, and Clopay systems, so the brand on your door won’t send you looking for a second company.
Signs You Need Garage Door Spring Repair Right Now
- The door won’t lift, or lifts only a few inches. A snapped torsion spring leaves the door too heavy for the opener, which is usually what prompts the call. Don’t keep pressing the button; the opener motor will strain and can burn out.
- A loud bang from the garage. That sharp crack is often the sound of a torsion spring breaking, and it can happen while the door is sitting closed. If you hear it, stop using the door and have the springs checked before the opener is run again.
- The door feels very heavy when you lift it by hand. A balanced door should lift easily with one hand. If it takes real effort, the spring has lost tension or a coil has snapped, and the opener is doing work it wasn’t built to do.
- The door drifts down or slams shut. A door that won’t stay put at the halfway point is out of balance, which usually means a spring or cable problem. It’s also a sign the door could come down on its own.
- Visible gaps or a stretched coil. A gap in the spring coil, a frayed safety cable, or a spring that looks longer than it used to all point to failure. Get it looked at before it fails completely.
Our Garage Door Spring Repair Process – Step by Step
- 1
Phone diagnosis. We ask what the door is doing, whether it’s a torsion or extension setup, and roughly how old the spring looks, so we can bring the right parts and give you a realistic arrival window. If it’s a snap and you’re blocked in, we’ll tell you what to do with the door while you wait.
- 2
On-site inspection. We check the spring, the cables, drums, and rollers, and lift the door by hand to test balance and weight. That tells us whether you need one spring, a matched pair, or a cable and roller as well.
- 3
Written estimate before work. You get the diagnosis and a written price before anything is touched. If something else needs attention, you hear it up front, not on the invoice.
- 4
The repair. We counterbalance the door, remove the old spring safely, fit the new one to the right spec, and re-tension it. Cables and safety hardware get checked and adjusted while we’re there.
- 5
Balance and safety test. We test the door by hand and with the opener, confirm it holds position, and check the safety reverse. Then we walk you through what we did.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Spring Repair Cost in Chesapeake?
A typical spring repair in Chesapeake runs $180 – $340 for one spring, and that covers the spring, the labor to fit and tension it, and the balance check. If both springs are replaced as a matched pair, expect about twice that range, since a pair is almost always swapped together. Here’s how the common jobs break down:
| Service | Typical Estimated Range |
|---|---|
| Spring repair (one spring) | $180 – $340 |
| Matched pair of springs | About twice the single-spring range |
| Cable repair | $130 – $250 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
What moves the number: whether you need one spring or a pair, the type and size of the spring, and whether the cables or drums need attention at the same time. The fastest way to avoid overpaying is to get a written estimate before any work starts and ask what’s included. Our estimate is free, and the written quote sets the final price. Call (877) 419-7485 for an exact quote.
Garage Door Spring Repair Near Chesapeake – Our Service Area
We cover Chesapeake and the surrounding cities, including Portsmouth, Virginia Beach, Norfolk, Suffolk, Carrollton, Smithfield, and Windsor. Neighboring areas like Benns Church, Carrsville, Hampton, and Bethel Manor are within reach too. Call (877) 419-7485 to book.
Serving Chesapeake, VA – Our Local Coverage Area
We serve Chesapeake and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Spring Repair in Chesapeake
Garage door spring repair is the work of replacing or re-tensioning the springs that counterbalance the door’s weight so it can be lifted safely. It covers torsion springs (above the door) and extension springs (along the tracks), plus the cables that support them. Because springs are under extreme tension, it’s a job for a trained technician, not a do-it-yourself project.
A single spring repair usually takes about an hour, and a matched pair runs a little longer once testing is included. If cables or rollers need work at the same time, add time for that. We’ll give you a realistic window when you call.
Spring repair in Chesapeake typically runs $180 – $340 for one spring, and a matched pair costs about twice that. The exact price depends on the spring type, size, and whether cables need replacing too. The written estimate sets the final price, and it’s free. Call (877) 419-7485 for an exact quote.
Yes. We work on Wayne Dalton, Amarr, LiftMaster, Chamberlain, Genie, Clopay, Craftsman, and Raynor equipment, and we know where each brand’s springs and hardware tend to wear. That means we can match the right spring the first time. If you have one of these brands, we can help.
Yes, we offer same-day spring repair where the schedule allows. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Our work comes with a warranty on the repair itself, and we’ll tell you the coverage in writing before you agree to the job. If a spring we fitted fails, call us and we’ll take care of it. Details are confirmed with the written estimate.
Clear the area directly under and in front of the door, and keep cars and people clear while we work. Tell us up front if the opener is still trying to run the door, since that can add strain to the system. Then we’ll handle the rest.
Schedule Your Garage Door Spring Repair Service in Chesapeake Today
A broken spring leaves your garage door stuck, and it’s not a job to put off. Call (877) 419-7485 for garage door spring repair in Chesapeake. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, the price is agreed before any work starts, and our technicians have up to 9 years of experience on torsion and extension springs. We work on Amarr, Wayne Dalton, Craftsman, Raynor, and the other major brands. One call handles it.
Written by the team at Chesapeake Garage Door Repair Experts.